TGK25/TGK35 CNC lua hohonu a me ka mīkini ʻoki
Ka hoʻohana ʻana i ka mīkini
● ʻO ka hana ʻana i ka ʻōwili ʻia e hiki ai i ka ʻawaʻawa o ka mea hana i Ra0.4.
● Deep hole processing rolling technology is a kind of non-cutting processing, through plastic deformation, the inner hollow surface can reach the surface roughness koi 'ia e ka workpiece.
Hoʻonui ʻia nā pono o ka ʻōwili:
● Hoʻomaikaʻi i ka roughness ili, ka roughness hiki basically hiki Ra≤0.4μm.
● pololei roundness, ellipticity hiki i ≤0.03mm, coaxiality ≤0.06mm.
● Hoʻonui i ka paʻakikī o ka ʻili, hoʻopau i ka deformation stress, a hoʻonui i ka paʻakikī e HV≥4 °.
● Aia kahi ʻāpana koʻikoʻi koena ma hope o ka hana ʻana. Hoʻonui i ka ikaika luhi e 30%.
● E hoʻomaikaʻi i ka maikaʻi o ke kūpono, e ho'ēmi i kaʻaʻahu a hoʻonui i ke ola lawelawe o nā'āpana, akā, ua ho'ēmiʻia ke kumukūʻai hana o nā'āpana.
pololei
● Ka ili roughness o workpiece boring≤Ra3.2μm.
● Roughness o workpiece olokaʻi surface≤Ra0.4μm.
● Cylindricity o workpiece processing≤0.027/500mm.
● Mea hana hana roundness≤0.02/100mm.
Nā Kūlana Kūlana Nui
| Ka laulā o ka hana | TGK25 | TGK35 |
| ʻO ke anawaena ʻoluʻolu | Φ40～Φ250mm | Φ40～Φ250mm |
| ʻO ka hohonu ʻoluʻolu kiʻekiʻe | 1-9m | 1-9m |
| Laulā pipili mea hana | Φ60～Φ300mm | Φ60～Φ450mm |
| ʻĀpana milo | ||
| Kiʻekiʻe waena waena | 350mm | 450mm |
| ʻāpana pahu pahu ʻawaʻawa | ||
| ʻO ka lua liʻiliʻi ma ka ʻaoʻao mua o ka milo | Φ100 1:20 | Φ100 1:20 |
| Ka holo wikiwiki (stepless) | 30～1000r/min | 30～1000r/min |
| ʻāpana hānai | ||
| Ka holo wikiwiki (stepless) | 5-1000mm/min | 30～1000r/min |
| Holo wikiwiki o ka pallet | 3m/min | 3m/min |
| ʻāpana kaʻa | ||
| ʻO ka mana kaʻa o ka pahu pahu ʻawaʻawa | 60kW | 60kW |
| ʻO ka mana mīkini pahū hydraulic | 1.5kW | 1.5kW |
| ʻO ke kaʻa holo wikiwiki no ka mea hoʻokūkū kiʻekiʻe | 4 kW | 4 kW |
| E hānai i ka mana kaʻa | 11kW | 11kW |
| ʻO ka mana kaʻa kaʻa hoʻoluʻu | 7.5kWx2 | 7.5kWx3 |
| Nā ʻāpana ʻē aʻe | ||
| Pumi helu ʻia o ka ʻōnaehana hoʻomaha | 2.5 MPa | 2.5 MPa |
| Kahe ʻōnaehana hoʻoluʻu | 200, 400L/min | 200, 400, 600L/min |
| Ua helu ʻia ke kaomi hana o ka ʻōnaehana hydraulic | 6.3MPa | 6.3MPa |
| ʻO ka ikaika paʻa kiʻekiʻe loa o ka applicator aila | 60kN | 60kN |
| Mākēneki Separator kahe kahe | 800L/min | 800L/min |
| ʻO ke kaomi ʻeke kānana kahe ʻana | 800L/min | 800L/min |
| Pono pono kānana | 50μm | 50μm |